Kelvinator KSD25HRG, Руководство пользователя

Страница: 12 / 24

12
Timer operation
Timer operation
ON/OFF
MODE
FAN
TEMP
SLEEP SWING DIRECT
LED FOLLOW ME TURBO SELF CLEAN
TIMER
OFF
TIMER
ON
SILENCE
FP
Press the TIMER ON button can set the auto-on time of the unit.
Press the TIMER OFF button can set the auto-off time of the unit.
To set the Auto-ON time
1. Press the TIMER ON button. The remote controller shows
TIMER ON, the last Auto-on setting time and the signal "H"
will be shown on the LCD display area. Now it is ready to reset
the Auto-on time to START the operation.
2. Push the TIMER ON button again to set desired Auto-on time.
Each time you press the button, the time increases by half an
hour between 0 and 10 hours and by one hour between 10 and
24 hours.
3. After setting the TIMER ON ,there will be a one second delay
before the remote controller transmits the signal to the air
conditioner. Then, after approximately another 2 seconds,
the signal "H" will disappear and the set temperature will
re-appear on the LCD display window.
To set the Auto-OFF time
1. Press the TIMER OFF button. The remote controller shows
TIMER OFF, the last Auto-off setting time and the signal "H"
will be shown on the LCD display area. Now it is ready to reset
the Auto-off time to stop the operation.
2. Push the TIMER OFF button again to set desired Auto-off time.
Each time you press the button, the time increases by half an
hour between 0 and 10 hours and by one hour between 10 and
24 hours.
3. After setting the TIMER OFF, there will be a one second delay
before the remote controller transmits the signal to the air
conditioner. Then, after approximately another 2 seconds, the
signal "H " will disappear and the set temperature will
reappear on the LCD display window.
WARNING caution
• When you select the timer operation, the remote controller
automatically transmits the timer signal to the indoor unit for
the specified time. Therefore, keep the remote controller in
a location where it can transmit the signal to the indoor unit
properly.
• Timer setting is in half hourly intervals up to 10 hours then
hourly intervals to 24 hours
1
2