Kelvinator KHC601BL, Инструкция пользователя, Страница: 8 / 16

8
FITTER’S INSTRUCTION
INSTALLATION
All the installation procedures (electrical connections) must be carried out
by an electrician in accordance with the standards and laws in force.
ANY ADJUSTMENT, MAINTENANCE, ETC. MUST BE CARRIED OUT
WITH THE HOB UNPLUGGED AT THE MAINS.
POSITION
The hob is designed to be fitted into a work surface which is larger then the
hob. See Fig. 1 and 2.
If the hob is to be fitted into a surface/oven, follow the instructions of the
oven manufacturer and ensure that the ventilation complies with Fig. 5. .
The hob is supplied with a seal to prevent infiltration into the unit. The seal
(C) must be fitted carefully into its seat. Fasten the hob with the brackets
(A), as shown in Fig. 6.
ELECTRICAL CONNECTIONS
Before connecting the electrics, ensure that:
- the household power supply meets the requirements on the plate located
under the hob and featured in this booklet;
- there is an earth system and that it works correctly;
-
for a direct connection to the mains, there must be an omnipolar cut-off
device on the power-supply line, with a contact cut-off distance of 3 mm or
over. The device must also be located in an accessible position near the
hob (the yellow-green earth wire must not be interrupted).