Kelvinator 18000Btu/h, Руководство по установке, Страница: 7 / 25

15
15
15
18
Capacity is based on standard length and maximum allowance
length is on the basis of reliability.
Oil trap should be installed every 5~7 metres.
When the connecting pipe is longer than 5 metres, additional
refrigerant should be added into the unit according to the
above table through the service port on the “LO” valve on
outdoor unit.
24
28 40
40
Indoor unit installation
Fig.4
Note:
1. Fit the Installation Plate
1). Fit the installation plate horizontally
on structural parts of the wall with
spaces around the installation plate.
2). If the wall is made of brick, concrete or
the like, drill eight (8) 5mm diameter holes
in the wall. Insert Clip anchor for appropriate
mounting screws.
3). Fit the installation plate on the wall with eight
(8) type “A” screws.
Correct orientation
of Installation Plate
Fit the Installation Plate and drill holes in the wall according to the wall structure and corresponding
mounting points on the installation plate.
( Dimensions are in “mm” unless otherwise stated)
6
Piping length elevation
8
10
10
8
8
20
20
20
25
25
5/8
16.0mm
3/8
9.53mm
5/8
16.0mm
3/8
9.53mm
21 40
10 25
5/8
16.0mm
3/8
9.53mm
INSTALLATION
Fig.3