Kelvin Cozy, Руководство по установке

Страница: 12 / 15

Lift the Cozy and set it in place over the
radiator (see figure 23 on the following
page) with the side brackets against the
wall. Adjust the feet levelers so the Cozy is
not resting on the top of the radaitor.
Note: If the Cozy is not flush against the
wall, the radiator may have to be shifted
closer to the wall.
2.
10
Unfurl the soft insulation affixed to the rear
of the Cozy and tuck it between the rear of
the radiator and the wall. (Figure 23)
1.
Secure the L-Bracket to the side of the Cozy
using the L-Bracket Screws and secure the
L-Bracket to the wall using self-tapping
screws. ( Figure 24-25 on following page)
3.
Using the white insulation tape, tape over
the cut in the rigid insulation to leave a
snug and clean-looking fit against the
radiator pipe.
4.
Installation – Lifting & Placing the Cozy
Now the metal enclosure can be placed over the
radiator:
Cozy Installation Guide Kelvin Systems, Inc.