Kelvin Hughes
MANTA
DIGITAL
TM
Quick Start Guide:
Chapter
4
:
Getting started
HBK-4002, issue 2 February 2013
Page
7
of
26
4.2.2 Standb
y activities …
4.2.3 Software version
4.2.4
Radar sensor selection …
Chart Maintenance:
Starts Chart Maintenance mode
which is automatically enabled for Chart Radar and
ECDIS
but is also available as a purchasable option.
feature.
Route planning:
Starts Route Planning mode which is
automatically enabled for Chart Radar and ECDIS but is
also available as a purchasable optional feature.
Alarm configuration:
Opens the Alarm Configuration
page where system alarms can be set-up.
Radar Sensor Selection:
Selects any transceiver(s)
connected to the system as Master or Slave.
The system is set to RUN by selecting any of the modes
enabled in ‘
Go to Run…
The
current
Software Version
is displayed at the top of
the standby screen as
Software version ZM-2144 Vx.x.x
(where x.x.x is the version of software currently installed).
Selecting the software version automatically opens a new
page that shows the software loaded into various parts of
the system. Using specific instructions supplied
separately, the system software can also be upgraded
from this page.
Place the cursor over the desired mode and left click to
open.
In an interswitched system, place the cursor over the
desired transceiver and
left-click
to select as
Master
or
right-click
to select as
Slave
. In single radar systems (one
transceiver and no interswitch) it is not necessary to select
a sensor.
