ATTACHING THE FLY
12. Find the zippers in the fly. This will be the vestibule
over the entrances at the front of the tent. Drape
the fly over the tent body with the zippers over the
doors (figure 9).
Figure 9
6
13. Slide the silver pole through the sleeve on the
underside of the fly just above the door/vestibule
area (figure 10A).
14. Insert spring pins at the front corners of the tent
into the ends of the silver poles (figure 10B).
Figure 10B
Figure 10A
11. Stake the tent down (figures 8A and 8B)!
Figure 8A
Figure 8B
Figure 7A
Figure 7B
• IF YOU’RE HAVING A HARD TIME
STAKING INTO THE GROUND, USE
ROCKS TO ANCHOR DOWN YOUR
TENT. (SEE ILLUSTRATION)
• TO GET THE TAUTEST PITCH, START AT
ANY CORNER, THEN MOVE TO THE
DIAGONAL CORNER FOR EACH STAKE.
STAKING TIPS
5
9. Insert the spring pins on the black webbing located
by the floor seams at the center of the tent into the
end of the BLACK pole.
Repeat for the other side of the
black pole.
10. Attach clips located at the seams of the tent to the
corresponding poles above each (figures 7A and
7B)
. NOTE: Clips are color coded for each pole.
