KELTEK Incorporated | Sierra Wireless: MP70 Quick-start Guide
2 //
4
SIERRA MP70
QUICK-START GUIDE
HOW TO INSERT
A SIM CARD
1. Use a #1 Phillips screwdriver to remove the SIM card cover.
2. Slide the primary SIM card in brass side down until it clicks into place.
3. If you are using a dual cellular setup, the secondary SIM will go into the
lower slot, brass side up.
4. Once installed, you may re-attach the cover.
01 //
GENERAL TROUBLESHOOTING:
LED BEHAVIOR
1. Use a #1 Phillips screwdriver to remove the SIM card cover.
2. Slide the SIM card in brass side up until it clicks into place.
3. If you are only using a single cellular plan, the SIM will go into slot A1
4. If you are using dual cellular plans, the SIMs will go into slot A1 and B1
5. Once installed, you may re-attach the cover.
02 //
