Kelon Inverter Multi-Split Type Room Air..., Инструкция по использованию и уходу

Страница: 54 / 80

Indoor temperature
Indoor temperature
SMART button is ineffective in SUPER mode.
Target temperature
Target temperature
21 ℃ or below
26 ℃ or below
22 ℃ 22 ℃
26 ℃
26 ℃
Over 26 ℃
Over 26 ℃
21 ℃ -23 ℃
23 ℃ -26 ℃
Your feeling
What you can do in SMART mode
button adjustment procedure
Operation mode
Operation mode
HEATING
FAN ONLY
DRY
DRY
Room temperature
decrease 1.5
℃ after
operate for 3 minutes
Room temperature
decrease 1.5
℃ after
operate for 3 minutes
COOLING
COOLING
Press the SMART button, the unit enters SMART mode(fuzzy logic operation) directly regardless of
the unit is on or off. In this mode, temperature and fan speed are automatically set based on the
actual room temperature.
Uncomfortable
because of
unsuitable air
flow volume.
Uncomfortable
because of
unsuitable flow
direction.
Indoor fan speed alternates among
High, Medium and Low each time this
button is pressed.
Press it once, the vertical adjustment
louver swings to change vertical airflow
direction. Press it again, swings stops.
Operation mode and temperature are determined by indoor temperature
Note: Temperature, airflow and direction are controlled automatically in SMART mode.
However, a decrease or rise of up to 2
℃ can be set with the remote controller if you still
feel uncomfortable.
Operation instructions
12
SMART mode
Heat pump models
Cooling only models
CLOCK button
You can adjust the real time by pressing CLOCK button, then
using and buttons to get the correct time, press
CLOCK button again the real time is set.
MODE CLOCK TIMER ON TIMER OFF
DIMMER
SMART
MUTE
TEP SWITCH
SLEEP
I FEEL SOFT
SWING
SWING
(invalid for this model)