Kellys THEOS F100, Руководство пользователя

Страница: 15 / 54

EN
OWNER'S
MANUAL EBIKE
15
specification recommended by the manufacturer. If the bolts and nuts remain loose or if the product
becomes damaged, the e-bike may suddenly fail during the ride, resulting in serious injury.
Do not disassemble the product. Any unprofessional intervention may result in personal injury.
NOTE
Put covers on all connectors that are not in use. Ensure that all connectors are dry and ensure that
all connectors are dry after riding in a wet environment or after washing. Otherwise, running, or
condensed water can cause corrosion of components and thus failure of the motor and battery.
Corrosion of the contacts can lead to short circuits and fire hazards or other damage to electrical
components.
The product has been designed to be water-resistant and resistant to wet weather riding conditions.
However, do not deliberately put it in the water.
Consult your dealer for product installation and setup.
Do not turn the e-bike the other way round. Damage to the cycle computer or shifting switch may
occur.
Handle the product with care so as not to expose it to any shocks.
Although the e-bike functions as a standard bike when the battery is removed, the light will not
illuminate when connected to the electrical power system and will not shift when using electronic
shifting. Be aware that using the e-bike in this condition is breaking road traffic laws in some European
Union countries.
NOTICE
If there are any malfunctions or problems, please contact your dealer. Never attempt to modify the
system yourself, as this may cause problems in its operation.
E-BIKE RIDING
1. Turn on the power. Do not put your feet on the pedals when switching the drive on. A system error
may occur.
2. Select your preferred assist mode.
3. The assist mode starts working when the pedals start to turn.
4. Change the assist mode according to the driving conditions.
5. Turn off the power when parking the e-bike.
NOTICE
Keep the e-bike keys you were given when you bought it clean and protected from corrosion. In case
of loss, keep a photo of the key with the number visible on the metal part of the key. If necessary,
a new key will be produced based on this data.
SPEED SENSOR
The speed sensor measures the rotation speed of the wheels and sends signals to the display. The gap
between the speed sensor and the magnetic tip must be 1 mm to 15 mm (PANASONIC) or 3 mm to 17
mm (Shimano). If the gap is smaller than these values, or if the speed sensor is not fitted, the display
will not show the speed and the PTO will not function properly.
NOTICE
When riding the e-bike, you must have both hands on the handlebars. When riding without your
hands on the handlebars, the e-bike can move uncontrollably.
IMPORTANT NOTICE
For information on the use and settings of the products not found in the instruction manual, please
contact the place of purchase or the e-bike dealer. The original Shimano systems user manual,
as well as dealer manuals for professional and experienced bike mechanics, can be found on the
manufacturer's website at http://si.shimano.com.
Do not disassemble or modify this product. Use the product in accordance with local laws and
regulations.
This manual or the separately enclosed battery manufacturer's manual contains important safety and