Kellyco Minelab X-Terra 70 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 31

Kellyco Minelab X-Terra 70 Скачать руководство пользователя страница 19

30

31

The X-Terra 70 is highly sensitive and has
a wide Sensitivity adjustment range. It is
important to set the correct Sensitivity
level for your detecting conditions.

Sensitivity is the detector’s level
of response to a target and its
environment. Real targets are indicated
by distinct beeps. Interference or false
targets are interpreted as crackling or
popping sounds.

Tiny ferrous junk targets might be
detected when the Sensitivity is set to
a high level. The detector will also be
affected by minerals in certain soils and
signals from electrical appliances.

Some experimentation with the
Sensitivity scale may be required for
different areas. For beginners, start with
a low setting and increase it progressively.

Decreasing the Sensitivity of the X-Terra
70 may stabilise the detector, reducing
false signals and interference, and
assisting in differentiating between
signals caused by soil mineralisation and
those of metal targets. Always choose
the highest stable Sensitivity setting to
ensure optimum performance.

For beach detecting, a setting below 15
may be required. In high trash areas, such
as modern parks, a setting below 9 may
be required, especially when searching
for shallow coins.

The highest Sensitivity settings, 22-30,
should be used only in the quietest,
most stable conditions.

SENSITIVITY

Press

MENU

SELECT

and choose Sensitivity.

Use the

+

and

–

buttons to adjust the

Sensitivity level.

Press

PINPOINT

DETECT

, to return

to detection.

ADJUSTING SENSITIVITY

Recommended Sensitivity Settings

Diﬃ

cult ground or noisy conditions

1-8

Park with trash

9

New user

12

Salt water beach

15

Coin & Treasure Mode (Default)

16

Park with no trash

20

Prospecting Mode (Default)

22

Experienced user

23-30

«
...
17
18
19
20
21
...
»

Содержание Minelab X-Terra 70
































Отзывы:

Нет отзывов