Kelly 12X, Руководство по эксплуатации

Страница: 17 / 32

16
Chain Mount Arm Height Adjustment
1. Use tractor hydraulics to raise the module chain or chain mount plate that requires adjustment. Position
a suitable block or stand to support the arm. Using the tractor hydraulics, lower the machine until the
height adjusting chains are loose.
2. Remove spring retaining clip. Slide chain up to the top of the slot in lifting arm to pass the chain through
the cross at top of plate.
3. Slide chain back down to the bottom when the desired position is reached. To achieve “one link” of
adjustment, lift chain to the top of the slot, pass one link through the slot and rotate 90 degrees to allow
the next link in the adjusting chain to lower into the same slot.
To achieve “half link” of adjustment lift the chain to the top of the slot and slide chain horizontally and
lower the same link into the second slot. This will raise or lower the chain mount plate by half a link
depending on which slot the chain started in. Any excess chain can be fed back through the second slot.
4. Install retaining clip. Remove stand.
Step 1 Step 2
Step 3
Step 4