14
Operate at 540 rpm. Start with the lowest possible speed; check that the flail mower
is working effectively with the engine at 540 rpm without straining.
Stop and check that the cutting unit is correctly adjusted after the first 10 metres.
Warning!
The mower must always be adjusted with the tractor's engine switched off.
•
Do not turn sharply or reverse when the machine is lowered to the ground.
Warning!
Do not connect the PTO shaft when the machine is in raised position or on full
gas operation.
•
The rotating blades can throw stones etc. from the ground with great force. It is
therefore important for the operator of the machine to ensure that there is no one else
in the vicinity of the machine during operation.
•
Above the mower's operating system there are safety hatches and safety panels.
These prevent earth and stones from being ejected around the machine and protect
the operator of the machine from the rotating blades.
•
When cutting tall grass, the grass sometimes winds itself around the rotor and blades.
For this reason, be attentive to abnormal noise from the machine or vibrations.
Switch off the tractor, disconnect the machine and check that the blades rotate freely.
•
IMPORTANT! Make sure the rotors have stopped rotating before lifting the machine
to check the blades. Wait a few minutes to ensure that the blades have stopped rotating.
The illustration shows 35-XKH145