Kellfri 35-XKE280, Руководство пользователя

Страница: 3 / 32

3
Table of contents >>
INTRODUCTION
Thank you for choosing a product from Kellfri AB. By following general safety information,
operating instructions and common sense, you will have many years of enjoyable use of the
product. Kellfris equipment and products are aimed to be use by active farmers with high
demands on functionality.
PRODUCT INFORMATION
Flail mower XKE280 is a powerful machine for those who have high demands on performance
when operating over dense vegetation. Suitable for tractors between 90-100 hp. The working
width is 2.8 m which makes it convenient for mowing, trimming medium or large grass areas.
The mower has coarse-toothed knives in the chassis to break the grass better and detachable
counter knives to keep the grass in the machine to help chop the material. The high rotor
speed gives the hammer flails a good ability to cut and chop all types of material and you get
a reliable machine that is effective even for large material flows.
The cutting height is adjusted by the support roller . The adjustable support roller guarantees
a correct cutting height on uneven ground. The cutting height can be adjusted between 0-70
mm which gives you the opportunity to mow the grass near the ground and thus get a more
even result. The grass is evened out and the remnants decay faster.
The support roller has scraping iron to keep the roller clean from cut material. The support
roller is built into the chassis to withstand rough terrain and is protected during collision. On
the front side, the mower is provided with chain protectors that are compliant with the ground
and protect both the tractor and the surroundings from ejected stone and grass. As standard,
this flail mower is equipped with side shift which allows you to move the machine to the right
or left.The mower has an openable hatch. The hatch can be leave open when you need a good
material flow when cutting big areas.
TECHNICAL DATA 35-XKE280
Length x Width x Height 3010 x 1290 x 935 mm
Working width 2800 mm
Working height 0 - 70 mm
Weight 862 kg
Sideshift Standard
Openable hatch Standard
PTO Standard
Power requirement 90-100 hp
Hammer flails 22 pcs (Y-flails not inlcuded - optional)
PTO speed 540 RPM
3 point attachment Cat 2
Gearbox oil capacity 1,5 - 1,8L oil type 80w 90