Kellfri 35-VKMATV150HXL Скачать руководство пользователя страница 14

14

TABLE OF CONTENTS

14

Caution! 

When driving from normal work of the heavier mowing, it is normal that the engine runs 

heavy and the turning speed get slower. When this happen  SLOW DOWN IMMEDIATELY so 

that the engine can resume the normal speed. Follow the instructions above at “Normal 

speed”. Expect speed is much lower in hard work.

FAILURE OF THESE MAY RESULT IN POWER TRANSMISSION SLIP, AND VERY SERIOUS DAMAGE 

AT COUPLING AND DRIVE BELTS

The support skids shouldn’t rest or be drag onto the ground, the skids are there to 

support the machine over obstacles like large rocks or mounds. If the skids are rest-

ing on the ground during operation, you can get soil/ground damage and deep 

grooves if flails hit the ground.

AFTER USE

• 

Parking is not allowed with the equipment above ground, but with the equipment rest-

ing on the ground.

• 

Rinse the implement if necessary.

TRANSPORT MODE

When the mower is moved from one operation to another, it is advised to raise the deck to the 

highest position, use the screw jack (see section mowing height). The engine must be turned 

off and the blades stopped before adjusting to the transport position. Remove all debris or 

grass etc. from the mower before you leave the field. Never move from one place to another 

whilst engine is still running. Please consider that flail mower is not legal on public roads and 

it shall not be used on public roads. Maximum speed when driving is 30km / h.

djust the height of the machine by 

turning the jack.

TRANSPORTATION AND STORAGE

Make sure there are no people, children and foreign objects around the area before transport-

ing the machine. Always take an extra caution during the transport. Ensure that the product 

is well secured and that transport brackets are mounted. Always place the load as low as pos-

sible. Respect the danger zone even during transport. When lifting the equipment, never go 

underneath suspended loads. Trailer used for transport should have working brakes.

Always store the machine in a dry place preferably underneath a cover when not in use. Ensure 

that the product is stable and not likely to tip over. Never let children play where the machine 

is being stored. Always keep in mind the risk of tipping!

Содержание 35-VKMATV150HXL





























Отзывы: