Kellfri 35-SKL145, Руководство пользователя

Страница: 7 / 24

7
Table of contents >>
MAINTENANCE AND SERVICE
Make sure the machine is stable and does not risk falling over when performing maintenance
and service. Replace damaged and worn parts immediately to reduce the risk of injury. Per-
form maintenance, service and checks as recommended. Use only spare parts with equivalent
performance to reduce the risk of damage and damage.
• Regularly check the condition of theproduct/machine. Tighten bolts and nuts as needed.
If cracks, twisting, bending, gaps or fatigue are detected, stop the operation and rectify
the errors. Avoid using the product/ machine at temperatures below -20 ° C and higher
than + 30 ° C.
• After changing parts, such as wheels, bearing, etc. check that the nuts or bolts are tight-
ened. Check and retighten after a few hours och operation.
• Lubricate all lubriacting points regularly.
• Never weld on the towing eye or other parts of the machine that can affect or alters the
the material’s strength.
• Alwaya double check that all bolts and nuts are tightened after maintenance and service.
• Machines with gearbox or hydraulic system - It is very important to check the oil level
regularly!
IMPORTANT! Check the oil level (gearbox / engine oil) and lubricate lubrication points regularly!
IMPORTANT! Avoid lubricating too much. Dirt gathers easily on excess grease which increases
wear. After lubrication, wipe off excess grease from couplings.
Kellfri AB is constantly working to further develop their products and therefore reserves the
right to make changes regarding, among other things, design and appearance without prior
notice.
TRANSPORTATION AND SETUP
• Make sure that the area is free from people, children and objects before transport.
• Be extra cautious during transportation and movement and ensure that the machine / product is
well anchored and existing transport locks or pins are mounted.
• Always place the load as low as possible. All cargo that sticks out should be securely anchored.
• Respect the danger zones even during transport.
• When lifteing a machine or heavy parts, no one is allowed to be underneath suspended load.
• Trailer used for transportation should have functioning brakes.
• When traveling on a public road, the SMV sign must be affixed.
• Check tire pressure, see info on tire sides. Do not exceed the maximum pressure!
• Always keep the appliance or product in a dry place, preferably under cover when not in use.
• Make sure that the machine or product is standing stable and does not give the risk of overturning.
• Never allow children to play at the storage area. Kepp in mind the risk of crushing
RECYCLING
When disposing, the machine must be disassembled and transported to the in-
tended location of the municipality. Contact your municipality for further infor-
mation.