Kellfri 35-SKL145, Руководство пользователя

Страница: 3 / 24

3
Table of contents >>
INTRODUCTION
Thank you for choosing a product from Kellfri AB. By following general safety information,
operating instructions and common sense, you will have many years of enjoyable use of the
product. Kellfris equipment and products are aimed to be use by active farmers with high
demands on functionality.
PRODUCT INFORMATION
Kellfris SKL145 is a mower made for the smaller tractors. The machine is regulated so that the
work can be carried out alternatively behind the tractor or to the side, the hydraulic side shift
is standard. The verge flail mower can be angled 90 ° upwards and 50 ° downwards, which
makes it excellent for cutting edges, flat surfaces and hedges! Standard equipped with ham-
mer strokes, support roller and power transmission shaft.
INTENDED USE
The implement is intended to cut grass and chop brushwood. Clear the area from any objects
such as stones, branches, etc. before starting the operation. The machine is a single operated
machine. No one is allowed within the danger zone other than the operator during operation.
TECHNICAL INFORMATION 35-SKL145
Length x Width x Height 1650 mm x 1450 mm x 605 mm
Working width 1450 mm
Hydraulic Requires 2 double acting hydraulic outlet
PTO Standard
Side shifting Yes
Power requirement 25-50 hp
Rpm 540 r/min
Operating speed 6-12 km/h
3-point Cat. Cat.1
Weight 300 kg
Flail 24 pcs