Kellfri 34-FHH8, Руководство пользователя

Страница: 7 / 20

7
Table of contents
MAINTENANCE AND SERVICE
• Make sure that the equipment is stable and cannot tip over when carrying out maintenance
and service work.
• Replace damaged or worn parts to reduce the risk of injuries.
• Carry out maintenance, service and checks in line with recommendations.
• Only use spare parts with equal performance to reduce the risk of injuries and breakdowns.
Check that all nuts and bolts are tightened after maintenance and service work.
TRANSPORTATION AND SET-UP
• Check that the work area is free from bystanders, children and objects before driving off.
• Always observe additional caution during transport and moving.
• Ensure that the equipment or product is well anchored and that available transport
lashings are fitted.
• Always position the load as low as possible. All protruding loads should be well anchored.
• Respect the risk zones even during transport and moving.
• Do not permit anyone to walk under suspended loads when carrying out lifts.
• Trailers used for transport should have brakes that work.
• An SMV sign must be attached when travelling on public roads.
• Check tyre pressure - see information on the sidewalls of the tyres. Do not exceed
the maximum pressure!
• Always store the equipment or product in a dry place, preferably under a roof, when
not in use.
• Ensure that the equipment or product is stable and cannot tip over.
• Never permit children to play at the storage site.
• Be aware of the tipping risk!
RECYCLING
For scrapping, the equipment/product must be dismantled and transported to
a recycling station designated by your local authority. Contact your local
authority for further information.
Kellfri AB has a policy of continuous product development and therefore reserves the right
to make modifications, e.g. to the design and appearance of the product, without prior notice.