Kellfri 26-GAATV2, Руководство пользователя

Страница: 3 / 48

3
Table of Contents
Kellfri AB has a policy of continuous product development and therefore reserves the right
to make modifications, e.g. to the design and appearance of the product, without prior notice.
TECHNICAL DATA 26-GAATV2
Engine OHV 4-stroke engine, 15 hp
Fuel Petrol
Engine oil 1 litre (10W40 or 15W40)
Hydraulic oil 14.6 litre (HLP46)
Reach 2608 mm
Excavation depth 1994 mm
Max. loading height 1475 mm
Width stabilisers installed 2042 mm
Width of main frame 1062 mm
Total length 4702 mm
Minimum width in transport mode 1863 mm
Double-acting hydraulic cylinders x 4
Tyre pressure
(Maximum pressure must not be exceeded!)
See info on the sidewalls of the tyres
for exact values.
Bucket, serrated 230 mm
Weight 474 kg
INTRODUCTION
Thank you for choosing a product from Kellfri AB. Compliance with the safety instructions,
operating manual and sound common sense will guarantee many years of enjoyment
using the product. Kellfri’s equipment and products are aimed at self-employed farmers,
horse enthusiasts and other country-dwellers who have stringent performance demands.
PRODUCT INFORMATION
Compact and well-constructed backhoe digger with its own power source in the form
of a 15 hp petrol engine with recoil starter.
The mini-excavator digs to a depth of 2 m deep, with a serrated digger bucket 23 cm in
width. The bucket includes a grapple attachment that makes picking up stones an easier job.
Two-lever hydraulic valve for simple and flexible excavation. Wheels for moving with an ATV
or another vehicle with a 50 mm ball coupling.
When moving the mini-excavator, mount the wheels on the digger arm side to give
the machine complete mobility during transport. Before excavation work, move the wheels
to the engine side and place the stabilisers on the digger arm side.
During excavation work, the excavator arm can be used to either push or pull the machine
forwards or backwards in order to move it.
The product requires assembly.