16
Prior to mounting the long sides, you need to drill holes in the trailer to be able
to screw in the bolts.
Lift up one trailer flap, the angle should be at the edge of the trailer, see illustration.
Use a marker pen or similar to mark where the holes are to be drilled.
Lift down the flap and drill 3 holes per long side.
Use a 10 mm drill bit.
Lift up the flap again and secure it with the bolts.
Repeat the steps on the other long side.
M8x20
Floor lock to attach
the short sides in
the long sides.
Adjustable the U-bolt
to get the right length
and good locking.
Содержание 23-TV06PRO
Страница 9: ...9 Table of contents LOAD THE TRAILER CORRECTLY...
Страница 18: ...18 Table of contents...
