7
AFTER USE
•
Make sure the trailer standing on level ground when disconnecting from the ATV
•
Parking on uneven or inclined ground, place wheel blocks before disconnecting
•
To prolong the life of your trailer, do not store it outside. Store under or roof or cover it
TRANSPORT AND STORING
Make sure the area is clear of people, children and objects prior to transportation. Always be
extra careful during transport and movement. Ensure that the equipment or product is well
anchored and that existing transport safety devices are installed. Always place the load as low
as possible. Respect the danger zone even in the transport and movement. When lifting, never
stand under a suspended load. Carts used to transport should have functioning brakes.
Always keep the equipment or product in a dry place, preferably under cover when not in use.
Make sure that the equipment or product is stable and not likely to tip over. Never let children
play at the storage site. Keep in mind the risk of tipping!
MAINTENANCE AND SERVICE
Make sure the equipment is stable and not likely to tip over during maintenance and service.
Disconnect the trailer from the vehicle while the defects are fixed.
Replace damaged and worn parts immediately to reduce the risk of injury. Use only spare
parts with equivalent performance to reduce the risk of damage and failure. Perform mainte-
nance, servicing and inspections according to the recommendations.
Regularly check the condition of the trailer. Tighten wheel bolts and nuts as necessary. If
cracks, twisting, bending, glitches or fatigue is detected, stop using the equipment immedi-
ately and repair the equipment. Avoid using the equipment at lower temperatures than -20C
and higher temperatures than +30C.
•
After changing wheels, check the wheel nuts are tightened and tighten them after some
kilometers of driving. The tightening torque must not exceed 45 kg.
•
Grease the wheel bearings regularly.
•
Check that bearing setting is correct to avoid bearing gap or abnormal wear of bearings.
Bearing setting should rather be too hard than too loose.
•
Check all bolts and nuts are tightened after maintenance and service.
•
Always test the machine before work is started.
RECYCLING
Disposal of the product, disassemble and transport to the municipality’s recycling station.
Contact your local authority for further information.
