6
CONNECTING/DISCONNECTING EQUIPMENT
Read the tractor’s instruction manual before connecting the equipment. The equipment is
mounted on the grapple and is adapted for use with Kellfri’s grapple range.
NOTE.
Measure the width of the bracket behind the insert bucket. There are different
measure ments on the left and right side.
21-KGS40:
40
adapted for 21-KG08
Right: 16.4 cm
Left: 21 cm
21-KGS50:
50 cm adapted for 21-KG18
Right: 22.5 cm
Left: 25.5 cm
21-KGS70:
70 cm adapted for 21-KG21
Right: 25 cm
Left: 31 cm
AFTER USE
Do not park with a suspended load but with the equipment resting on the ground.
Wash down the equipment with water if necessary.
STORAGE
Always store the equipment or product on a dry surface, preferably under a roof when not in
use. Ensure that the equipment or product is stable and cannot fall over. Never permit children
to play at the storage site. Be aware of the tipping risk!
MAINTENANCE AND SERVICE
Visually inspect/check the equipment on a regular basis. The tractor’s engine must be turned
off and the equipment lowered to the ground before starting any servicing work. Make sure
that the equipment is stable and cannot tip over when carrying out maintenance and service
work. Replace damaged or worn parts to reduce the risk of injuries. Grease all moving parts
and grease nipples and check hydraulic hoses regularly. The hydraulic system is not adapted
for eco oil. Only use spare parts with equal performance to reduce the risk of injuries and
breakdowns. All repair work and electrical connections must be carried out by a qualified tech-
nician. Check that all nuts and bolts are tightened after use, maintenance and/or service work.
Always test the machine before starting work.
Warning!
Never use equipment or products
that have defective safety components.
RECYCLING
When scrapping, the equipment should be dismantled and transported to a designated recy-
cling station. Contact your municipality for further information.
