2
INTRODUCTION
Thank you for choosing a product from Kellfri AB. By following general safety information,
operating instructions and common sense, you will have many years of enjoyable use of the
product. Kellfris equipment and products are aimed to be use by active farmers with high
demands on functionality.
PRODUCT INFORMATION
Bale grapple for handling square and round bales. The design is without sharp edges for gen-
tle bale handling. Arms with hefty pipe sizes and four contact surfaces on each arm distributes
pressure evenly over a large area. Arms are seated on the stable sliding plates, which move
along the main frame. Adjustable safety frame that prevents the ball rolls over the cab. Bale
grab controlled by two double-acting cylinders, which is an advantage in confined spaces.
Two double-acting hydraulic cylinders controlled by a double acting valve with two male con-
nectors. Hydraulic hoses and fittings included.
APPLICATION AREA
Intended for handling sqare and round bales.
TECHNICAL DATA
Bale size
700-2100 mm
Max bale weight
1200 kg
LxWxH
1520 x 1100 x 670 mm
Recommended workingpressure
175 bar
Weight
302 kg
BGFRTN
Trima-bracket
BGFREN
Euro-bracket
20-BGFRTN
