20
INSTALLATION INSTRUCTIONS
The chainsaw is delivered separately (not fitted to the machine)
A mounting plate and bracket that locks the chainsaw holder in place is delivered together
with the chainsaw.
Make sure that the bracket is mounted on the chain
saw, (marked in the picture) if the bracket is not
mounted see the instruction below:
Install the bracket on the chainsaw
1. Disassemble the cover (marked on the picture)
2. Disassemble the chain and the sword
3. Install the bracket as shown in the picture above, tighten all screws
4. Re-fit the sword and chain, check and tighten the chain.
1.
2.
3.
