Keller CellaCast PA8 Series, Руководство пользователя

Страница: 18 / 76

EN
Two-colour channel [
Qu
] -> ATD function [
Q.Atd
]
Parameter Function Default
[
T.DEL
] Time delay [s] 1 s
(
T.ACT
) Sampling time [s] 15 s
► Press [Mode] to access the main menu
> The display shows [
Ao
]
► Press the [▼] until [ Qu ] is displayed
► Press [Mode]
> The display shows [
Q.EPS
]
► Press [▼] until [ Q.ATD ] is displayed
► Press [Mode]
> The display shows [ t.dEl ]
► Press [▼] until [ t.Act ] is displayed
► Press [Mode]
> The current sampling time is displayed
► Press [▲ or ▼] for 2 second
> The display flashes three times
► Press [▲ or ▼] to set the desired sampling time
► Press [Mode] to confirm the parameter
Exit operation
► Wait 30 seconds
or
► Press [▲ or ▼] to change to the parameter [
End
]. Then Press [Mode] to change to the
functional menu.
► In the functional menu press [▲ or ▼] to change to the parameter [ End ], then press
[Mode].
Alternatively, the parameters can be set via IO-Link.
10 Adaptation of temperature level
By changing the emissivity ratio, the difference between the measured temperature level and
true temperature can be compensated.
For this purpose, a comparison measurement with an immersion lance is required. Adjust
emissivity ratio in such a way that the measured values coincide. An increase in the emissivity
ratio results in a low temperature value.
The graph shows an approximation of the influence of the emissivity ratio setting on the change
in temperature value.
Quick Start Guide CellaCast PA 8x