20
9.FAQ and machine maintenance
1) Model not sticking to build plate.
(1)Bottom exposure time is insufficient ,increase the exposure
time
(2)Contact area between the model and build plate is small. Please
add raft ,
(3)Bad leveling
Layer separation or splitting
(1)
The printer is not stable while printing
(2)
FEP film is not tight enough or it needs to be changed
(3)
The printing build plate or resin VAT is not tightened.
9.1
、
Machine maintenance .
1.if Z axis make noise sound ,please apply
lubricant to Z lead screw
2
、
Do not use sharp objects to scrape off
the residues on the FEP film
