5).Press” “,the display shows 00”as default. Press” “ continuously to set the
turn-on time. Such as set the turn-on time 7:00am P1:See below :D (Memo: the setting time
0-24 for choice)
6).Press” “,the display shows the previous step turn-on time by default. Press
” “ continuously to set the turn-off time. Such as set the shutdown time at 13:00pm:
(Note: turn-off time later than turn-on time, when turn-on time same as turn-off time, the
unit in stand by mode)See below :E
7).Press” / “to setting the target temperature(Temperature range 10-49℃);
8). Repeat steps 3-7 above, you can set the whole weekly program. Then press” “to
confirmed;
9). To cancel the weekly function, press the " " agian , the light "P" will go off. The weekly
program is off. The product will revert to the previous function working status.
Note:
-After the above setting are completed and P program is working,press” / / /
“to check the setting time of each day and time periods,
-Press” / “,set working temperature under different time periods.
- The turn-on time periods 0~24hours, cannot set to minutes;
-The“TIME/OFF”can not be less than“TIME/ON”;
-When the“TIME/ON” is the same as“TIME/OFF”, the time period enter into standby
mode;
A
B C D E
Set open-window detection(ONLY by remote control)：
1). Press“ “，the product enter into working status. Heating for a moment untill stable.
2). Press” ” by remote control,light “ / ℃ “ will on; The temperature
