![background image](http://html2.mh-extra.com/html/keithley/sourcemeter-2600b-series/sourcemeter-2600b-series_reference-manual_4085220532.webp)
Series 2600B System SourceMeter® Instrument Reference Manual
Section 7: TSP command reference
2600BS-901-01 Rev. C / August 2016
7-193
Details
You only need to set the time zone if you use the
os.time()
and
os.date()
functions.
If only one parameter is given, the same time offset is used throughout the year. If four parameters
are given, time is adjusted twice during the year for daylight savings time.
offset
and
dstOffset
are strings of the form
"[+|-]hh[:mm[:ss]]"
that indicate how much
time must be added to the local time to get UTC time:
•
hh
is a number between 0 and 23 that represents hours
•
mm
is a number between 0 and 59 that represents minutes
•
ss
is a number between 0 and 59 that represents seconds
The minute, second, +, and
−
fields are optional.
For example, to set the UTC-5 time zone, you specify the string
"5"
, because UTC-5 is 5 hours
behind UTC and you must add 5 hours to the local time to determine UTC time. To specify the time
zone UTC4, you specify
"-4"
, because UTC4 is 4 hours ahead of UTC and 4 hours must be
subtracted from the local time to determine UTC.
dstStart
and
dstEnd
are strings of the form
"MM.w.dw/hh[:mm[:ss]]"
that indicate when
daylight savings time begins and ends respectively:
•
MM
is a number between 1 and 12 that represents the month
•
w
is a number between 1 and 5 that represents the week in the month
•
dw
is a number between 0 and 6 that represents the day of the week (where 0 is Sunday)
The rest of the fields represent the time of day that the change takes effect:
•
hh
represents hours
•
mm
represents minutes
•
ss
represents seconds
The minutes and seconds fields are optional.
The week of the month and day of the week fields are not specific dates.
Example
settimezone("8", "1", "3.3.0/02", "11.2.0/02")
settimezone(offset)
Sets
offset
to equal +8 hours, +1
hour for DST, starts on Mar 14 at 2:00
a.m, ends on Nov 7 at 2:00 a.m.
Sets local time zone to
offset
.
Also see
(on page 7-107)
(on page 7-164)
(on page 7-192)
setup.poweron
This attribute specifies which saved setup to recall when the instrument is turned on.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Not applicable
Nonvolatile memory
0