Keithley SourceMeter 2600B Series, Справочное руководство

Страница: 365 / 897

Section 7: TSP command reference Series 2600B System SourceMeter® Instrument Reference Manual
7-26 2600BS-901-01 Rev. C / August 2016
Details
The measurefunctions buffer recall attribute is like an array (a Lua table) of strings indicating the
function measured for the reading.
For dedicated reading buffers, all buffer attributes are saved to nonvolatile memory only when the
reading buffer is saved to nonvolatile memory.
Example 1
measurefunction = smua.nvbuffer1.measurefunctions[5]
Store the measure function
used to make reading
number 5.
Example 2
printbuffer(1, 5, smua.nvbuffer1.measurefunctions)
Print the measurement
function that was used to
measure the first five readings
saved in source-measure unit
(SMU) channel A, dedicated
reading buffer 1.
Example output:
Current, Current,
Current, Current,
Current
Also see
bufferVar.measureranges (on page 7-26)
bufferVar.n (on page 7-27)
bufferVar.readings (on page 7-28)
bufferVar.sourcefunctions (on page 7-29)
bufferVar.sourceoutputstates (on page 7-30)
bufferVar.sourceranges (on page 7-31)
bufferVar.sourcevalues (on page 7-32)
bufferVar.statuses (on page 7-33)
bufferVar.timestamps (on page 7-35)
Reading buffers (on page 3-6)
bufferVar.measureranges
This attribute contains the measurement range values that were used for readings stored in a specified buffer.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (R) Yes Clearing the buffer See Details Not applicable
Usage
measurerange
=
bufferVar
.measureanges[
N
]
measurerange
The measurement range used to acquire reading number N in the specified buffer
bufferVar
The reading buffer; can be a dynamically allocated buffer (user-defined), or a
dedicated reading buffer (such as
smua.nvbuffer1
)
N
The reading number ( 1 to bufferVar .n )