![background image](http://html1.mh-extra.com/html/keithley/sourcemeter-2600-series/sourcemeter-2600-series_reference-manual_4098633052.webp)
1-26 Getting Started
Series 2600 System SourceMeters Reference Manual
2600S-901-01 Rev. A / May 2006
Return to
Remote programming
Programming information is integrated with front panel operation throughout this
manual. Basic command information is listed in tables. For specific information on
programming, refer to
,
, and
of this manual.
Requesting readings
You can request readings by including the appropriate measurement command
as the argument for the
command. For example, the following will request
a channel A current reading:
print(smua.measure.i())
Requesting command settings
In a similar manner, settings for commands can be requested by including the
command as the argument for the
command. For example, the following
command will request the voltage source setting for channel A:
print(smua.source.levelv)
Setting
7
Default
Source:
Function
Voltage
Current value
0A
Voltage value
0V
Current range
100nA
Voltage range
100mV
Speed
Normal (1 PLC)
Triggering:
Trigger-in source
Immediate
Count
Finite
Interval
0s
Delay
0s
TSP-Link node
1
Table 1-3 (cont.)
Default settings
7. Where applicable, settings apply to both Model 2602/2612 channels.
Содержание SourceMeter 2600 Series
Страница 507: ...AppendixA Specifications Appendix A topics Model 2600S Specifications page A 2 2600S 901 01 Rev A May 2006...
Страница 575: ...AppendixF DisplayCharacterCodes Appendix F topics Introduction page F 2...
Страница 592: ......
Страница 593: ......