Series 2600 System SourceMeters Reference Manual
Getting Started 1-9
Return to
2600S-901-01 Rev. A / May 2006
Bottom Row
LOAD
Loads factory or user-defined scripts for execution.
RUN
Runs last selected factory or user-defined scripts.
STORE
Stores readings, source values, and timestamp values in one of two
internal buffers for later recall.
RECALL
Recalls stored readings, source values, and timestamp values from either
of the two buffers.
TRIG
Triggers readings.
MENU
Accesses the main menu for saving and recalling setups, selecting
remote interface, line frequency, self-tests, serial number and beeper
control.
EXIT
Cancels selection, backs out of menu structure. Also used as a LOCAL
key to take the unit out of remote.
ENTER
Accepts selection, moves to next choice or exits menu.
3 Range keys:
and
Selects the next higher or lower source or measure range.
AUTO
Enables or disables source or measure auto range.
4 Output control and LED status indicator:
OUTPUT ON/OFF
Turns source output on or off.
LED indicator
Turns on when output is on.
5 Rotary knob and CURSOR keys:
When in source edit, use CURSOR keys for cursor control and then rotate the knob to
change a source or compliance value. The rotary knob can also be used to enable or
disable the source edit mode.
When in a menu, use the CURSOR keys or rotary knob for menu item cursor control.
When displaying a menu value, use the CURSOR keys for cursor control and rotate the
knob to change the value. Pressing the knob opens a menu item, or selects a menu
option or value.
6 Display annunciators (not shown):
EDIT
Unit is in the source editing mode.
ERR
Questionable reading or invalid cal step.
REM
Unit in remote mode.
TALK
Unit addressed to talk.
LSTN
Unit addressed to listen.
SRQ
Service request.
REL
Relative mode enabled.
FILT
Analog filter or Averaging filter is enabled.
AUTO
Auto source or measure range selected.
ARM
Unit armed and ready to run.
TRIG
External triggering selected.
* (asterisk)
Readings being stored in buffer.
Содержание SourceMeter 2600 Series
Страница 507: ...AppendixA Specifications Appendix A topics Model 2600S Specifications page A 2 2600S 901 01 Rev A May 2006...
Страница 575: ...AppendixF DisplayCharacterCodes Appendix F topics Introduction page F 2...
Страница 592: ......
Страница 593: ......