12-52 Instrument Control Library
Series 2600 System SourceMeters Reference Manual
2600S-901-01 Rev. A / May 2006
Return to
opc
function
This function sets the OPC bit in the status register when all overlapped commands are
completed.
Function
Sets the Operation Complete status bit when all overlapped commands are completed.
Usage
opc()
Remarks
• This function will cause the Operation Complete bit in the Standard Event Status
Register to be set when all previously started local overlapped commands are
complete. Note that each node will independently set their Operation Complete bits
in their own status models.
• Any nodes not actively performing overlapped commands will set their bits
immediately. All remaining nodes will set their own bits as they complete their own
overlapped commands.
Details
See “
” in
.
Also see
opc
Содержание SourceMeter 2600 Series
Страница 507: ...AppendixA Specifications Appendix A topics Model 2600S Specifications page A 2 2600S 901 01 Rev A May 2006...
Страница 575: ...AppendixF DisplayCharacterCodes Appendix F topics Introduction page F 2...
Страница 592: ......
Страница 593: ......