Series 2600 System SourceMeters Reference Manual
Buffer (Data Store)
7-3
Return to
2600S-901-01 Rev. A / May 2006
Buffer configuration menu
The various buffer configuration menu items include:
•
COUNT:
Sets number of readings to store (1 to 110,000). NOTE: All of the
buffers share a common memory area. Therefore, to store as many as
110,000 readings, the source values and timestamps must not be enabled
for any of the buffers.
•
CHANA_BUFF:
Configures Channel A buffer.
–
DEST:
Sets data storage destination (Buffer 1, Buffer 2, or NONE).
–
BUFFER1:
Configure buffer 1.
•
CLEAR:
Clear buffer (YES or NO).
•
ELEMENTS:
Enable (ON) or disable (OFF) data storage elements;
SRC-VAL (source value) or TSTAMP (time stamp).
–
BUFFER2:
Configure buffer 2.
•
CLEAR:
Clear buffer (YES or NO).
•
ELEMENTS:
Enable (ON) or disable (OFF) data storage elements;
SRC-VAL (source value) or TSTAMP (time stamp).
•
CHANB_BUFF:
Configures Channel B buffer (Model 2602/2612 only).
–
DEST:
Sets data storage destination (Buffer 1, Buffer 2, or NONE).
–
BUFFER1:
Configure buffer 1.
•
CLEAR:
Clear buffer (YES or NO).
•
ELEMENTS:
Enable (ON) or disable (OFF) data storage elements;
SRC-VAL (source value) or TSTAMP (time stamp).
–
BUFFER2:
Configure buffer 2.
•
CLEAR:
Clear buffer (YES or NO).
•
ELEMENTS:
Enable (ON) or disable (OFF) data storage elements;
SRC-VAL (source value) or TSTAMP (time stamp).
Storing readings
NOTE Model 2601/2611 buffer configuration menu items are
the same as covered above except for channel
selection.
NOTE Pressing the Model 2602/2612 STORE key will
overwrite the destination buffer on both channels
unless NONE is selected (see above).
Содержание SourceMeter 2600 Series
Страница 507: ...AppendixA Specifications Appendix A topics Model 2600S Specifications page A 2 2600S 901 01 Rev A May 2006...
Страница 575: ...AppendixF DisplayCharacterCodes Appendix F topics Introduction page F 2...
Страница 592: ......
Страница 593: ......