Keithley PIO-32, Руководство пользователя

Страница: 43 / 76

4-2 Cabling and Wiring
Optional Cables
Warning:
Do not use the C-3200/C-32NN cables at voltages above
30V RMS, 42.4V peak, or 60VDC. These cables are rated for 30V RMS,
42.4V peak, or 60VDC maximum. Use at higher voltages may result in
insulation breakdown and shock hazard.
To connect the PIO-32 Series boards to screw terminal panel accessories
or other equipment, you need additional cables. You have the option of
providing your own cables or purchasing two C-3200/C-32NN cables.
The C-3200/C-32NN cables have a 40-pin ribbon connector at one end
and a 37-pin, D-type male connector at the other end. Use the 40-pin
connectors to bring the cables through the board’s rear adapter plate slot
to the headers on the board. You use the 37-D connector to attach
equipment or to wire a screw terminal panel. Figure 4-1 shows the C-3200
and C-32NN cables. Note that the C-3200 cable is 30-inches long while
the C-32NN cable has NN extra feet of cable (NN being the number of
feet added to the standard cable).
Figure 4-1. C-3200/C-32NN Optional Cables
40-pin ribbon
connector
pin 1
37-D male
connector
30 in./NN feet
pin 1
removeable strain relief