![background image](http://html1.mh-extra.com/html/keithley/pdiso-8/pdiso-8_user-manual_3961291023.webp)
3-5
7. Click
Exit.
Then, on the screen
that appears saying “Thank you for
using DriverLINX,” click
Done
. The System Settings Changed dialog
box appears.
8. On the System Settings Changed dialog box, click
No
. (The system
will be rebooted and configured later under “Configuring Your
Installation” on page 3-6.) The screen returns to the Windows
desktop.
9. Print out one section of a DriverLINX manual that you will briefly
review later during system configuration. Proceed as follows:
a.
In the
Start
menu under
Programs
→
DriverLINX,
click
On-line Manuals.
A menu document appears.
b.
In the menu document, scroll until you find the major category
Configuration
.
c.
Under
Configuration
click
Hardware References
. A list of
documents appears.
d. In the list of documents, click
Keithley PIO Series
. Acrobat
Reader opens and the manual entitled
Using DriverLINX with
Your Hardware—Keithley PIO Series
appears.
e.
Print the following section from the
Using DriverLINX with Your
Hardware—Keithley PIO Series
manual: “Configuring the PIO
Series.”
Note:
If your data acquisition system is not connected to a printer, you
can display and print the
Using DriverLINX with Your Hardware—
Keithley PIO Series
manual sections from another system, directly from
the CD-ROM (without installing anything). To display the manual, open
the Windows Explorer, then double click on
X:\Drvlinx4\Docs\Notes\kmbpio.pdf
, where
X
= the letter of the
CD-ROM drive. Acrobat Reader must already be installed on the other
system. If necessary, you can first install Acrobat Reader directly from the
CD-ROM by double clicking
X:\Acrobat\setup.exe
.
10. Continue with the next section, “Configuring Your Installation.”