Keithley KUSB-3160 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 59

Keithley KUSB-3160 Скачать руководство пользователя страница 28

Chapter 3

16

Connecting Directly to the Host Computer

Generally, host computers have two USB ports. These ports are
completely independent. To connect a KUSB-3160 module directly to
a USB port of the computer, perform the following steps:

1.

Attach one end of the USB cable, which is shipped with the
KUSB-3160 module, to the USB port on the module.

2.

Attach the other end of the USB cable to one of the USB ports on
the host computer, as shown in

The operating system automatically detects the USB device.

Figure 2: Attaching the Module Directly to the Host Computer

3.

If the device driver has not been installed, the New Hardware
Found wizard appears. Click

Next

to have the wizard search for

the device driver, then proceed to step 4.

4.

Click the option to search for the driver, then click

Next

.

5.

Click the option to specify the location, browse to the location on
the CD that contains the driver files, then click

Next

.

6.

Click

Next

.

7.

Click

Finish

.

A New Hardware Found dialog box appears indicating that Windows is
installing the driver for the USB device.

USB Cables

KUSB-3160 Modules

Host Computer

USB Ports

«
...
26
27
28
29
30
...
»

Содержание KUSB-3160




























































Отзывы:

Нет отзывов