Keithley KUSB-3160 Скачать руководство пользователя страница 15

Страница: 15 / 69

Overview

Supported Software

The following software is available for use with the KUSB-3160
module:

•

Device Driver

−

This software is provided on the CD shipped

with the module. The device driver allows you to use a
KUSB-3160 module with any of the supported software packages
or utilities. Refer to the

KUSB-3160 Getting Started Manual

for

more information on loading and configuring the device driver.

•

Quick Data Acq application

−

This application provides a quick

way to get a KUSB-3160 module up and running. Using the
Quick Data Acq application, you can verify the features of the
module, display data on the screen, and save data to disk.

•

DataAcq SDK

−

This DT-Open Layers Software Develop Kit

(SDK) allows programmers to develop application programs for
the KUSB-3160 using the Microsoft C compiler in Windows 2000
or Windows XP.

•

DTx-EZ

−

This software package contains ActiveX controls that

allow Microsoft Visual Basic® or Visual C++® programmers to
access the capabilities of the KUSB-3160 module.

•

DT-LV Link

−

This software package allows LabVIEW®

programmers to access the capabilities of the KUSB-3160 module.

Содержание KUSB-3160





































































Результаты поиска

Содержание KUSB-3160

Отзывы:

Похожие инструкции для KUSB-3160

Бренды по названию

Популярные бренды

Keithley KUSB-3160, Руководство пользователя

Результаты поиска

Содержание KUSB-3160

Отзывы:

Похожие инструкции для KUSB-3160

Бренды по названию

Популярные бренды