Keithley DMM7510, Справочное руководство

Страница: 889 / 1036

Section 8: TSP command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
8-276 DMM7510-901-01 Rev. B / May 2015
trigger.lanin[N].wait()
This function waits for an input trigger.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
triggered = trigger.lanin[ N ].wait( timeout )
triggered Trigger detection indication (
true
or
false
)
N The trigger packet over LAN to wait for (1 to 8)
timeout Maximum amount of time in seconds to wait for the trigger event
Details
If one or more trigger events have been detected since the last time
trigger.lanin[ N ].wait()
or
trigger.lanin[ N ].clear()
was called, this function returns immediately.
After waiting for a LAN trigger event with this function, the event detector is automatically reset and
rearmed regardless of the number of events detected.
Example
triggered = trigger.lanin[5].wait(3) Wait for a trigger event with LAN trigger 5 with a
timeout of 3 s.
Also see
trigger.lanin[N].clear() (on page 8-274)
trigger.lanin[N].overrun (on page 8-275)
trigger.lanout[N].assert() (on page 8-276)
trigger.lanout[N].stimulus (on page 8-282)
trigger.lanout[N].assert()
This function simulates the occurrence of the trigger and generates the corresponding event.
Type TSP-Link accessible
Affected by Where saved Default value
Function Yes
Usage
trigger.lanout[ N ].assert()
N The LAN event number (1 to 8)