![background image](http://html2.mh-extra.com/html/keithley/dmm6500/dmm6500_user-manual_4023258054.webp)
Section 4: Making basic front-panel measurements
DMM6500 6½ Digit Multimeter User's Manual
4-2
DMM6500-900-01Rev. A / April 2018
Device connections
Connect the DMM6500 to the resistor in a 2-wire (local sense) configuration. In this configuration, the
device is connected between the INPUT HI and INPUT LO terminals.
To make the connections:
1. Power off the DMM6500.
2. Connect the test leads to the front-panel INPUT HI and INPUT LO terminals, as shown in the
following figure.
3. Connect the test leads to the resistor.
Figure 28: DMM6500 front-panel 2-wire resistance measurement