In this section:
Model 3722 dual 1x48 high-density multiplexer card ............... 6-1
Available accessories: Model 3722 .......................................... 6-2
Connection information: Model 3722........................................ 6-2
Schematics: Model 3722 .......................................................... 6-3
Introduction to the Model 3722 card
The Model 3722 has two independent banks of 1x48 two-pole multiplexers, which is ideal for
applications that require a high channel count. The two banks can automatically be connected to the
Series 3700A mainframe backplane and optional digital multimeter (DMM) through the analog
backplane connection relays. This connection allows the mainframe to reconfigure the card as a
single 1×96 two-pole multiplexer, or to enable card-to-card expansion for even larger configurations.
Another feature of this card is the latching electromechanical relays that can accommodate 300 V,
1 A switched signal levels.
The Model 3722 uses two 104-pin D-sub connectors for signal connections. A solder-style connector
kit (Model 3792-KIT104-R) and pre-assembled cables (Models 3722-MTC-1.5 and 3722-MTC-3) are
available for card connections.
Figure: Model 3722 card
Figure 14: Model 3722
Section 6
Model 3722 high-density multiplexer card