![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750742.webp)
Appendix C: LAN concepts and settings
Model 2657A High Power System SourceMeter® Instrument Reference Manual
C-2
2657A-901-01 Rev. B/December 2012
Contact your corporate information technology (IT) department for permission before you connect the
Model 2657A to a corporate network.
If you have problems, see
LAN troubleshooting suggestions
Record all network configurations before modifying any existing network configuration information on
the network interface card. Once the network configuration settings are updated, the previous
information is lost. This may cause a problem reconnecting the host computer to a corporate network,
particularly if DHCP Enabled = NO (disabled).
Be sure to return all settings to their original configuration before reconnecting the host computer to a
corporate network. Failure to do this could result in loss of data. Contact your system administrator for
more information.
Step 1: Identify and record the existing IP configuration
To identify the existing IP configuration:
1. Open a command prompt window:
Microsoft
®
Windows
®
2000 or Windows XP:
a. Click
Start
and select
Run
.
b. In the Open field, type
cmd
.
c. Click
OK
.
Microsoft Windows Vista
®
or Windows 7:
a. Click
Start
.
b. Select
All Programs > Accessories >
Command Prompt
.
2. At the command prompt, type
ipconfig/all
and press the
Enter
key. A list of existing IP
configuration information for your computer is displayed.
CAUTION
NOTE
Содержание 2657A
Страница 3: ......