![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750646.webp)
Model 2657A High Power System SourceMeter® Instrument Reference Manual
Section 7: TSP command reference
2657A-901-01 Rev. B/December 2012
7-333
trigger.blender[N].reset()
This function resets some of the trigger blender settings to their factory defaults.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
trigger.blender[
N
].reset()
N
The trigger event blender (1 to 4)
Details
The
trigger.blender[
N
].reset()
function resets the following attributes to their factory defaults:
•
trigger.blender[
N
].orenable
•
trigger.blender[
N
].stimulus[
M
]
It also clears
trigger.blender[
N
].overrun
.
Example
trigger.blender[1].reset()
Resets the trigger blender 1
settings to factory defaults.
Also see
(on page 7-331)
trigger.blender[N].stimulus[M]
(on page 7-333)
trigger.blender[N].stimulus[M]
This attribute specifies which events trigger the blender.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Instrument reset
Recall setup
Trigger blender N reset
Not saved
0
Usage
eventID
= trigger.blender[
N
].stimulus[
M
]
trigger.blender[
N
].stimulus[
M
] =
eventID
eventID
The event that triggers the blender action; see
Details
N
An integer representing the trigger event blender (1 to 4)
M
An integer representing the stimulus index (1 to 4)
Details
There are four stimulus inputs that can each select a different event. The
eventID
parameter can be the event
ID of any trigger event.
Use zero to disable the blender input.
Содержание 2657A
Страница 3: ......