![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750431.webp)
Section 7: TSP command reference
Model 2657A High Power System SourceMeter® Instrument Reference Manual
7-118
2657A-901-01 Rev. B/December 2012
lan.reset()
This function resets the LAN interface.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
lan.reset()
Details
This function resets the LAN interface. It performs the commands
lan.restoredefaults()
and
lan.applysettings()
.
Also see
(on page 7-108)
lan.restoredefaults()
This function resets LAN settings to default values.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
lan.restoredefaults()
Details
The settings that are restored are shown in the following table.
Settings that are restored to default
Attribute Default
setting
lan.autoconnect
lan.ENABLE
lan.config.dns.address[N]
"0.0.0.0"
lan.config.dns.domain
""
lan.config.dns.dynamic
lan.ENABLE
lan.config.dns.verify
lan.ENABLE
lan.config.duplex
lan.FULL
lan.config.gateway
"0.0.0.0"
lan.config.ipaddress
"192.168.0.2"
lan.config.method
lan.AUTO
lan.config.speed
100
lan.config.subnetmask
"255.255.255.0"
lan.linktimeout
20
(seconds)
lan.lxidomain
0
lan.nagle
lan.DISABLE
lan.timedwait
20
(seconds)
The
lan.restoredefaults()
function does not reset the LAN password. The
localnode.password
attribute controls the web password, which can be reset separately.
Содержание 2657A
Страница 3: ......