![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750425.webp)
Section 7: TSP command reference
Model 2657A High Power System SourceMeter® Instrument Reference Manual
7-112
2657A-901-01 Rev. B/December 2012
Example
print(lan.config.dns.hostname)
Outputs the present dynamic DNS host name.
Also see
(on page 7-110)
lan.config.dns.verify
This attribute defines the DNS host name verification state.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
1 (lan.ENABLE)
Usage
state
= lan.config.dns.verify
lan.config.dns.verify =
state
state
DNS hostname verification state:
1
or
lan.ENABLE
: DNS host name verification enabled
0
or
lan.DISABLE
: DNS host name verification disabled
Details
When this is enabled, the instrument performs DNS lookups to verify that the DNS host name matches the value
specified by
lan.config.dns.hostname
.
Example
print(lan.config.dns.verify)
Outputs the present DNS host name verification
state.
If it is enabled, the output is:
1.00
Also see
(on page 7-111)
lan.config.duplex
This attribute defines the LAN duplex mode.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory 1 (lan.FULL)
Usage
duplex
= lan.config.duplex
lan.config.duplex =
duplex
duplex
LAN duplex setting can be one of the following values:
1
or
lan.FULL
: Selects full-duplex operation
0
or
lan.HALF
: Selects half-duplex operation
Содержание 2657A
Страница 3: ......