![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750024.webp)
Section 1: Introduction
Model 2657A High Power System SourceMeter® Instrument Reference Manual
1-4
2657A-901-01 Rev. B/December 2012
Capabilities and features
The Model 2657A High Power System SourceMeter
®
instrument has the following features:
•
Resistance and power measurement functions
•
Four-quadrant sink or source operation
•
Contact check function
•
High-capacitance mode for load impedance up to 10
μ
F (microfarads)
•
Linear, logarithmic, and custom sweeping and pulsing
•
Filtering to reduce reading noise
•
High-speed sampling fast analog-to-digital converter (ADC); the fast ADC uses a hardware buffer
that can store up to 5,000 readings in a single measure action
•
Dual ADCs to measure current and voltage at the same time
•
Overvoltage protection
•
Safety interlock incorporated into rear-panel digital I/O connection
•
Trigger model that supports extensive triggering and synchronization schemes at hardware
speeds
•
Internal memory stores five user setup options
•
Dedicated reading buffers that can each store and recall over 140,000 measurements; additional
dynamic reading buffers can be created
•
USB flash drive access for saving data buffers, test scripts, and user setups
•
Digital I/O port that allows the Model 2657A to control other devices
•
Web-based characterization tool that provides easy access to data gathering, sweeping, and
pulsing features
•
LXI
®
version 1.4 Core 2011 compliance
•
Embedded TSP scripting engine that is accessible from any host interface; responds to
high-speed test scripts that are comprised of instrument control commands
•
TSP-Link
®
expansion bus that allows TSP-enabled instruments to trigger and communicate with
each other; advanced Test Script Processor (TSP
®
) scripting engine features enable parallel
script execution across the TSP-Link network
•
Supports IEEE-488 (GPIB), RS-232, and ethernet local area network (LAN) connections
Additional source and measure features:
•
Source ± DC voltage from 5 mV to 3030 V
•
Source ± DC current from 30 fA to 120.12 mA
•
Measure ± DC voltage from 1 mV to 3030 V
•
Measure ± DC current from 20 fA to 120.12 mA
Содержание 2657A
Страница 3: ......