manualshive.com logo in svg

Keithley 2601A, Руководство пользователя, Страница: 18 / 94

Поделиться
Скачать
Keithley 2601A Скачать руководство пользователя страница 18

1-4

Return to 

Section Topics

2600AS-900-01 Rev. B / September 2008

Section 1: Front and Rear Panel Operation

Series 2600A System SourceMeter® Instruments User’s Manual

Bottom Row: Source-measure setup

LOAD

Loads factory or user-defined scripts for execution.

RUN

Runs last selected factory or user-defined scripts.

STORE

Stores readings, source values, and timestamp values in one of two internal buffers per

 

channel for later recall.

RECALL

Recalls stored readings, source values, and timestamp values from either of the two buffers.

TRIG

Triggers readings.

MENU

Accesses the Main Menu for saving and recalling setups, selecting remote interface, line

 

frequency, self-tests, serial number and beeper control.

EXIT

Cancels selection, and backs out of menu structure. Used as a 

LOCAL

 key to take the unit

 

out of remote.

ENTER

Accepts selection, moves to next choice or exits menu.

3. Range keys:

and 

Selects the next higher or lower source or measure range. 

AUTO

Enables or disables source or measure auto range.

4. Output control and LED status indicator:

OUTPUT ON/OFF

Turns source output on or off. 

LED indicator

Illuminated when output is on.

5. Navigation wheel, USB port, and CURSOR keys:

When in source edit, use the 

CURSOR

 keys for cursor control and then turn the 

navigation wheel

 to 

change a source or compliance value. The can also be used to enable or disable the source edit mode.

When in a menu, use the 

CURSOR

 keys or 

navigation wheel

 

for menu item cursor control. When 

displaying a menu value, use the 

CURSOR

 keys for cursor control and turn the 

navigation wheel

 to 

change the value. Pressing the 

navigation wheel

 opens a menu item or selects a menu option or value.

Use the USB port to connect a USB flash drive. The USB flash drive stores reading buffer data, scripts, 
and user setup options.

6. Display indicators (not shown):

EDIT

Unit is in the source editing mode.

ERR

Questionable reading or invalid calibration step.

REM

Unit in remote mode.

TALK

Unit addressed to talk.

LSTN

Unit addressed to listen.

SRQ

Service request.

REL

Relative mode enabled.

FILT

Digital filter is enabled.

AUTO

Auto source or measure range selected.

ARM

Unit armed and ready to run.

* 

(asterisk)Readings are being stored in buffer.

Содержание 2601A































































































Отзывы:

Нет отзывов