Keithley 2600a series Скачать руководство пользователя страница 373

Страница: 373 / 696

2600AS-901-01 Rev. B / September 2008

Return to

Section Topics

19-51

Series 2600A System SourceMeter® Instruments Reference Manual

Section 19: Remote Commands

display.trigger

Usage

func = display.smuX.measure.func -- Reads function.

display.smuX.measure.func = func -- Writes function.

Set

func

to one of the following values:

display.MEASURE_DCAMPS

Selects current measure function.

display.MEASURE_DCVOLTS

Selects volts measure function.

display.MEASURE_OHMS

Selects ohms measure function.

display.MEASURE_WATTS

Selects power measure function.

Remarks

• Selects the displayed measurement function: amps, volts, ohms, or watts.
• SMU A and SMU B can be set for different measurement functions.

Details

See

Measurement functions

Section 11

Example

Selects the current measure function for SMU A:

display.smua.measure.func = display.MEASURE_DCAMPS

display.trigger.clear

Function

Clears the front panel trigger event detector.

TSP-Link
accessibility

This function can be accessed from a remote TSP-Link node.

Usage

display.trigger.clear()

Remarks

• The trigger event detector remembers if an event has been detected since the last

display.trigger.wait

call. This function clears the trigger’s event detector and

discards the previous history of

TRIG

key presses.

• This attribute also clears the

display.trigger.overrun

attribute.

Also see

display.trigger.wait

display.trigger.overrun

display.trigger.EVENT_ID

Attribute

The trigger event number.

TSP-Link
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

event_id = display.trigger.EVENT_ID

event_id

The trigger event number.

Remarks

• Set the stimulus of any trigger event detector to the value of this constant to have it respond to

front panel trigger events.

display.trigger.overrun

Attribute

The event detector overrun status.

TSP-Link
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

overrun = display.trigger.overrun

overrun

The trigger overrun state.

Содержание 2600a series

























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2600a series

Отзывы:

Keithley 2600a series, Справочное руководство, Страница: 373 / 696

Результаты поиска

Содержание 2600a series

Отзывы: