To view the measurements on the front-panel graph:
1. Press the
MENU
key.
2. Under Views, select
Graph
.
You can swipe and use pinch and zoom to change the view
of data on the graph. You can also adjust the graph settings
using the options in the Data and Scale tabs.
FAQs
Where can I find updated drivers or firmware?
For the latest drivers and additional support information, see
the Keithley Instruments support website.
To find drivers that are available for your instrument:
1. Go to
2. Enter
2461
and select
GO
.
3. Select
Software
.
My data looks odd or is wrong. What should I do?
Verify the connections from the instrument to the test fixture.
Also check the connections from the DUT to the test fixture
socket.
Why did my settings change?
The instrument saves many of the commands with the
source or measure function that was active when you set
them. For example, assume you have the measure function
set to current and set a value for NPLCs. When you change
the measure function to voltage, the NPLC value changes to
the value that was last set for the voltage measure function.
When you return to the current measure function, NPLC
value returns to the value you set previously.
