Section 3: Operation
Model 2001-TCSCAN Scanner Card User's Manual
3-6
2001-TCSCAN-900-01 Rev. A / April 2018
Selecting a measurement function assigns it to the channel you selected. To assign the same
measurement function to all selected channels, select the same measurement function for each
channel.
Run a scan
Once the scan is set up, you can run it.
To start the scan from the front panel, use one of the following:
•
Press the
TRIGGER
key.
•
On the Scan menu, select
Start
.
•
On the Scan swipe screen, select
Start Scan
.
•
From the trigger mode indicator on the home screen, select
Initiate Scan
.
You can pause the scan from scan swipe screen on the front panel. Select
Pause Scan
. To continue
the scan, select
Resume Scan
.
Stop a scan
You can stop a running scan.
When you stop a scan, the channels remain in the state they were in (opened or closed) when the
scan was stopped.
To stop a scan from the front panel:
Select
Abort Scan
from the Scan menu, the Scan swipe screen, or
the trigger mode indicator on the
home screen.
•
On the Scan menu, select
Abort Scan
.
•
On the Scan swipe screen, select
Abort Scan
.
•
From the trigger mode indicator on the home screen, select
Abort Scan
.