Keithley 2000-SCAN-20, Инструкция по эксплуатации

Страница: 43 / 81

3-8 Operation
SCPI scanner commands
Table 3-1 summarizes commands that control scanner operations over the remote interface.
For more detailed information on these and other bus commands, refer to the multimeter manual.
Table 3-1
Summary of SCPI scanner commands
Command Description
:ROUTe
:CLOSE <list>
:STATe?
:OPEN ALL
:ALL
:MULTiple
:CLOSE <list>
:STATe?
:OPEN <list>
:SCAN
[:INTernal] <scan list>
:EXTernal <scan list>
:LSELect NONE | INTernal | EXTernal
[:SENSe[1]]
:FUNCTion <function list>
Route subsystem.
Close channels.
Return all closed channels.
Open channels.
Open any closed channels.
Multiple channel commands:
Close specified channels (1 through 20).
Query closed channels.
Open specified channels.
Scanning commands.
Program internal scan list.
Program external scan list.
Select scan list.
Sense subsystem.
Select measurement function.
Notes:
1. The :ROUT:SCAN:LSEL command is coupled to the :ROUT:SCAN:INT command. When the
:ROUT:SCAN:INT command is executed, the :ROUT:SCAN:LSEL parameter will be set to INTernal.
2. Uppercase letters indicate short form of commands.
3. Brackets indicate optional command and should not be used when sending commands to instrument.
4. When sending SCPI commands, be sure to include a space character between each command and
parameter.