"
A radiation symbol (C)
appears when the Alert feature is on.
"
An hourglass (D) appears to the left of the numeric display during a timed
count.
"
TOTAL (E) appears when the Digilert 100 is in Total mode.
"
X1000 (F) appears when the radiation level is displayed in X1000 mode.
"
CAL (G) appears while you are calibrating the Digilert 100.
"
SET (H) appears when you are setting the timer, the Alert level, or the
calibration factor, or working in the Utility menu (the numeric display shows
the setting you are adjusting instead of the current radiation level).
"
The current unit of measurement (I)- CPM, CPS, mR/hr or
μ
Sv/hr--is
displayed to the right of the numeric display.
"
MENU (J) appears when you are in the Utility Menu.
The Switches
The Digilert 100 has two switches on the front, and three buttons on the end
panel. Each switch has three settings, which are described below.
On/Off/Audio Switch (3)
Audio.
The Digilert 100 is on, and it makes a clicking sound for each radiation
event detected.
On.
The Digilert 100 is operating, but audio is off.
3
(A) Numeric Display
(B) Low Battery
(C) Alert
(D) Timer
(E) Total
Mode
(I) Units of
Measurments
(H) Utility Menu, Timer,
Calibation, Alarm
Set Mode
(G) CAL
Mode
(F) X1000
Mode
(J) Menu
Illustration 3
